Building A Camera Pole For Your Cell Phone In 10 Minutes


[Heartbeat] Build of a camara pole for your cell phone in only ten minutes.
[Music: zAck borer – Love can get ahold] Even if you don’t have the newest GoPro camera with multiple add-ons you can anyway create cool videos as long as you have a cell phone with video function.
[Music: zAck borer – Love can get ahold] This video tutorial shows you how to create a camera pole for less then €1,- in under ten minutes which will offer you great camera angles.
[Music: zAck borer – Love can get ahold] You only need little MacGyver style materials: scrap wood, rubber band, wood screws
[Music: zAck borer – Love can get ahold] And some tools: 2 mm wood bit, 4 mm universal bit, rounded rasp, screw driver, drill machine, saw
[Music: zAck borer – Love can get ahold] Fasten the piece of wood in a bench vise, put the ski pole on to it and make marks left and right of it.
[Music: zAck borer – Love can get ahold, Squeaking] Turn the wood by 90° and bore 2 mm holes next to the marks. The bit needs not to go through completely.
[Music: zAck borer – Love can get ahold] [Music: zAck borer – Love can get ahold, Drilling] Turn the wood back into position and fasten it again to saw it into two halfs along side.
[Music: zAck borer – Love can get ahold, Sawing] Take the half where the holes do not kompletely go through and widen them to 4 mm.
[Music: zAck borer – Love can get ahold] [Music: zAck borer – Love can get ahold, Drilling] Use a rasp to create a mould between the holes. This has to be flatter than half of the skipole diameter.
[Music: zAck borer – Love can get ahold, Rasping] [Music: zAck borer – Love can get ahold, Rasping] Fasten the skipole inside the bench vise. I use soft wood like pine to prevent it from damages. Be careful not to squeeze it.
[Music: Blik – Nothing] Put the screws into the bigger holes and fasten the wood pieces on the ski pole’s sides.
[Music: Blik – Nothing] Activate the video mode of your cell phone and fasten it with the rubber band. That’s it.
[Music: Blik – Nothing] Production, Direction and Camera: XXLRay
[Music: Blik – Nothing] Music: zAck borer: Love Can Get Ahold, Blik – Nothing
[Music: Blik – Nothing] Software: openshot, ffmpegm hydrogen, gimp
[Music: Blik – Nothing] Materials: plywood, rubber band, wood screws, ski pole
[Music: Blik – Nothing] Werkzeug: bech vise, drill machine, 2 mm wood bot, 4 mm universal bit
[Music: Blik – Nothing] saw, half round rasp, screw driver, Somikon DV-72.Action Cam, Nokia E75
[Music: Blik – Nothing]

4 Replies to “Building A Camera Pole For Your Cell Phone In 10 Minutes

  1. Cool that you like it. You can see some more footage I took with this method in my video "Testing The Slopes Of … St. Andreasberg 2012" (ID PAQ4j_UVR9U).

Leave a Reply

Your email address will not be published. Required fields are marked *