In this video, we’ll show you how to insert
your Project Fi SIM card. You’ll need the SIM card from Project Fi.
Press down on the SIM card to pop it out. Grab your phone and the SIM tool.
If you lose the tool, a paperclip works too. Make sure your phone is off.
Find the SIM card tray on your phone. It will likely be on the top or left side.
It’ll look like this. Insert the paperclip or SIM tool into the hole. Push firmly but gently until the tray pops out. The SIM tray will pop out just a little bit,
so you’ll need to pull it completely out of the phone. Remove the tray and place the SIM card inside it. Match the corner of the SIM card to the tray with the Fi logo facing up. Put the tray back in the slot and push it gently back into the phone. If the SIM card pops out when you’re putting the tray back in, try holding the SIM card
down with your finger as you slide it in. Turn your phone back on and follow the on-screen instructions to activate your phone. If you run into any issues, contact Project Fi support or visit the help center at: support.google.com/fi.