INSTALL MOBILE CHARGER IN SCOOTY | HONDA DIO BS4


Hello,hi Welcome back and today our video will be about how to put charger inside carrier box their is charger hole their we have to put it so, let begin first of all you have to take power outlet 12 volt 1 amp is given this cost us Rs 360 AND ONE ZIP TIE WITH IT WHICH WE WILL TIE INSIDE this will not come with vehicle apart from you have to buy Rs 360 add it that all and here here we open it to put here their is one more thing wait…….you have to buy this part also which cost Rs 250 and…. you all can see here 5 volt 2 amp their is 1 amp also but in MI phones Redmi all which take 2 amp charger on that( 1amp will not support) so this part when you will buy take 5 volt 2amp don’t take 1 amp 1 amp will not support on MI phones we have to put like this simply usb port…..and just put cable here and that all that after charge enough that all let start opening first of all open carrier box let start opening and here is hole for here only we have to put charging here we have to put let open it and we have remove all nuts and screws opened…… just pull it up and here it comes out for time been no need for it, so we side it and we have opened it and….. you all can see here wire one their will be pipe and one just remain open yes this are the wire,you will get with new DIO only, which is BS4 earlyer my oooo… Red and White (scooty) which is my you will not get in that you will get in new one (BS4) and.. yaa..and OUTLET which i have shown earlyer in OUTLET wire given one wire with pipe and othere without pipe and. now we have to connect this wire only which one wire is without pipe in OUTLET that we have to put with pipe one and.. pipe one wire in OUTLET that we have to without pipe wire means on vehicle with that one ENOUGH simple things just we have to connect so, Let connect it first. with pipe one and we had done with it and this one with pipe one wire we connect with it we had connected and we had complete it and we had put on this(power outlet) and this we will put it on power outlet and charger usb cable okay.. and it is ready for charge only we have to put key ON Mode key ON Mode IGNITION OK. AND it is ready for charge and here is our Phone lets’ connect it here you all can see it is charging here and we had seen that it is charging mobile and now we will fit it properly

100 Replies to “INSTALL MOBILE CHARGER IN SCOOTY | HONDA DIO BS4

  1. Hey superb !! Don't give up !! Upload more videos !! It's amazing but put English sub-titles also in upcoming videos !!! Superb Bro !! ๐Ÿ˜˜

  2. Gusana hai gusana hai toh bas simple si baat hai khali gusana parta hai๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚ sorry yaar but bhai bolne ke tarika bohot si hai fit karna parta hai ya lagana parta hai bhi bol sakte hoo๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚ sunne mai bohot odd laraha tha yaar baar baar bolne par but good job๐Ÿ‘

  3. Nice bro really great video and really very helpful mine is honda cliq i will install the charger myself like you bro thanks man๐Ÿ‘

  4. Listen boy first go take a shower twice a day how untidy you are first take shower be tidy and clean then make video you look absolutely disgusting brah

Leave a Reply

Your email address will not be published. Required fields are marked *